Cymbol G3 Series Manual do Operador Página 18
- Página / 48
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
18
DRUM KIT SETUP
While selecting Kits, you can enter the Drum Kit Setup Menu
to access a few useful parameters pertaining to the current
Kit.
1. Press DRUM KIT to go to the Main Screen.
2. Use the VALUE UP / DOWN buttons or VALUE DIAL to select a Kit.
3. Press CURSOR DOWN to enter the Drum Kit Setup Menu for that Kit.
4. Select any of the options at the bottom of the LCD using the F-BUTTONS. Use CURSOR UP / DOWN
to move through the menu items and VALUE UP / DOWN or the VALUE DIAL to adjust the settings.
• MAIN (F1):
o Kit Level: The overall volume level for the Kit
(00-99)
o Graphic: The image used to identify the Kit on
the main screen.
• MIDI (F2):
o MIDI Chan: The MIDI channel over which the
module will send out Program Change
messages (01-16 or "OFF"). (When set to
"OFF," the other parameters below will not be
displayed.) You will need to set this properly
when using the DM8 module to play sounds on
another module.
o Ext Prog#: The Program Change number the module will send out (00-99).
o MSB: Sets the Most Significant Byte when using sounds on an external module that
requires bank changes (00-127 or "OFF").
o LSB: Sets the Least Significant Byte when using sounds on an external module that
requires bank changes (00-127 or "OFF").
• RESTORE (F3 or F4):
o Restore: Returns the Kit to its original factory
settings. Any edits you made to its Instruments,
Accompaniment, etc. will be discarded. To
restore the original settings, press RESTORE
(F1 or F2). To cancel, press EXIT.
Note: The DM8 will retain any changes you
make to the Instruments or parameters as
you move between the various Kits.
- HIGH-DEFINITION DRUM MODULE 1
- WITH DYNAMIC ARTICULATION 1
- TABLE OF CONTENTS 2
- (e.g., a 3
- GETTING STARTED 4
- THE BASICS 5
- SEQUENCES 6
- STORING DATA 7
- UTILITY 7
- REAR PANEL FEATURES 8
- TOP PANEL FEATURES 8
- SELECTING A KIT 10
- EDITING INSTRUMENTS IN A KIT 10
- EDITING MIDI PARAMETERS 14
- EDITING EFFECTS PARAMETERS 15
- DRUM KIT SETUP 18
- SEQ DRUMS ACCOMP 19
- RECORDING SEQUENCES 20
- EDITING SEQUENCES (DRUMS) 20
- SETTING UP THE CLICK TRACK 22
- STORING & COPYING DATA 24
- COPYING INSTRUMENTS 25
- STORING SEQUENCES 25
- STORING TRIGGER SETTINGS 25
- EXT. TRIG MENU 26
- TRIGGERING PARAMETERS 27
- VELOCITY CURVE 28
- MODE (RIDE BOW & BELL) 28
- HI-HAT CALIBRATION 29
- STORING EXT. TRIG SETTINGS 29
- UTILITY MENU 30
- MIDI (F2) 32
- TRIG (F3) 33
- SYS (F4) 33
- UPDATING THE MODULE 34
- MIDI SETUP 35
- RESTORING BACKUP SYSEX FILES 36
- MIDI IMPLEMENTATION CHART 37
- DM8 KITS 38
- DM8 SEQUENCES 39
- DM8 INSTRUMENTS 40
- 7-51-0333-A 48
Manuais e produtos relacionados com Gravadores de vídeo digitais (DVR) Cymbol G3 Series
(75 páginas)Electrolux PA31G - LÂMINA manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Electrolux PA31G - LÂMINA.
Nous fournissons des manuels en pdf 1 Electrolux PA31G - LÂMINA à télécharger gratuitement par type de document : Fiche d'information
Comentários a estes Manuais